Tempered Glass or Film Screen Protector and Which to Buy
You just paid for a new phone, and the shop assistant holds up two packets: a $35 tempered glass screen protector with "9H" printed in large letters, and a $12 film one that looks almost invisible.

You just paid for a new phone, and the shop assistant holds up two packets: a $35 tempered glass screen protector with "9H" printed in large letters, and a $12 film one that looks almost invisible. Both promise to save your screen, and you have no idea which claim is real.
A screen replacement on a recent flagship can cost $250 to $380, so the question is worth getting right. This guide explains what each type of screen protector actually does, what the numbers on the box mean, and how to pick the right one for the way you use your phone.
What a screen protector really protects against
Phone screens face two kinds of damage, and protectors are not equally good at both.
- Scratches. Keys, coins and especially sand. Sand contains quartz, which is hard enough to scratch the glass on most phones.
- Cracks and shatters. These come from impact, usually a drop onto a hard surface, and the edge or corner often takes the hit.
A thin layer on top of the screen is very good at taking scratches so your real glass does not. It is much less effective against cracks. A protector can absorb some energy from a direct face-down drop, but a drop on the corner sends force into the frame and the display underneath, and no protector stops that on its own. A case with raised edges does far more for drops.
Tempered glass vs film screen protector
Here is how the two main types compare in daily use:
| Feature | Tempered glass | Film (TPU or PET) |
|---|---|---|
| Typical thickness | 0.3 to 0.5 mm | 0.1 to 0.2 mm |
| Typical price | $10 to $45 | $6 to $20 |
| Scratch resistance | Good | Fair, can scuff over time |
| Impact absorption | Some, and it can crack instead of your screen | Very little |
| Feel under the finger | Smooth, like the original glass | Slightly soft or rubbery |
| Curved screen fit | Often poor at the edges | Good, flexes around curves |
| Ease of installing | Easier, it is rigid | Harder, bubbles are common |
For most flat screen phones, tempered glass is the better pick. It feels natural, it takes scratches well, and when it cracks after a drop you replace a $15 accessory instead of a $300 display. Film makes more sense on phones with strongly curved edges, where glass protectors tend to lift, or on foldables, where glass cannot be used at all on the inner screen.
What "9H" and other box claims really mean
Almost every glass protector says "9H hardness". This refers to the pencil hardness test, where pencils of increasing hardness are dragged across the surface. 9H is simply the hardest pencil in the test. It says nothing useful about how the glass compares to sand or keys, and it is printed on $3 protectors and $40 protectors alike.
Other claims to read carefully:
- "Military grade" or "drop tested". There is no standard drop test for screen protectors. Treat this as marketing unless a specific test and height are named.
- "Full coverage". Good if it fits, but full coverage glass often clashes with cases and lifts at the corners.
- "Oleophobic coating". Genuinely useful. It reduces fingerprints and keeps the surface smooth. It wears off in 6 to 12 months on every protector.
- "Privacy". A filter that darkens the screen from the side. It also reduces brightness by around 20 to 30 percent from the front.
The case against buying the most expensive one
Many shops push premium protectors at $40 to $60, often with a "lifetime replacement" promise. In my experience the extra money rarely buys extra protection.
Mid range glass protectors from established accessory brands use similar aluminosilicate or soda lime glass to the premium options, and in independent scratch tests the difference is small. The premium price mostly pays for the store's margin and for the replacement scheme, which often requires you to pay shipping each time. Meanwhile, the protector's job is to break so your screen does not. A cheaper protector you replace twice a year still costs less than one premium unit.
Where it is worth paying a little more is the installation kit. A frame or alignment tray that clicks onto the phone makes a straight, bubble free fit much easier, and a badly aligned protector annoys you every single day.
How to install a screen protector without bubbles
A clean install takes about ten minutes if you prepare properly.
- Pick the right room. A bathroom after running a hot shower for a minute has less dust in the air.
- Wash your hands and turn the phone off so the screen is dark and dust is easy to see.
- Clean the screen with the wet wipe, then the dry cloth, then the dust sticker. Check at an angle under a light.
- Align before peeling. Use the frame if one is included. Line up the speaker and camera cut-outs first.
- Peel and lower in one motion. Press in the middle and let the adhesive spread outwards.
- Push out bubbles with a card wrapped in the cloth. Small bubbles under film often disappear within 24 to 48 hours.
If you see a dust speck trapped under glass, lift the corner with a piece of tape, touch the speck with another strip of tape and lower it again. If the protector came with a spare, as many two-packs do, keep the second one in its sealed sleeve in a drawer so you are not paying shop prices after the first one cracks.
When you can skip one
If your phone is a mid range model you plan to replace in two years, you keep it in a case with a raised lip, and you never put it in a pocket with keys, a screen protector is optional. Light scratches rarely affect use, and resale value on mid range phones depends more on battery health and age. If you plan to sell or trade in a flagship, though, a clean screen can add real money, as our checklist on what buyers check on a used phone shows. For broader buying advice, see how to choose a phone that fits how you use it and more guides in our phones section.
Frequently asked questions
Is a tempered glass screen protector better than film?
For most flat screen phones, yes. Glass feels like the original screen, resists scratches better and can crack in place of your display. Film is better on strongly curved screens and foldable phones.
Do new phones still need a screen protector?
Modern phone glass is tougher against drops than it used to be, but it still scratches from sand and grit. If you keep your phone for years or want strong resale value, a cheap protector is worth it. If not, a good case matters more.
How often should you replace a screen protector?
Replace it when it cracks, chips at the edge or lifts in a corner. Even without damage, many people change it every 6 to 12 months because the anti-fingerprint coating wears off and the surface starts to feel sticky.
More in Phones
Phones
What to Do When Your Phone Gets Wet, Step by Step
A friend dropped her phone into a kitchen sink last March, fished it out in about two seconds, dried it on a tea towel and...
Phones
SIM PIN and SIM Swap Protection and What Each One Stops
Your phone has a passcode, a fingerprint and probably face unlock.
Phones
Why Your Phone Is Not Charging and How to Fix It
You plug your phone in before bed, and in the morning it is sitting at 14 percent.